Ghost Immobiliser Fitting
Secure your vehicle from key theft hacking, cloning, and theft with the world's first aftermarket immobiliser for CAN. With the additional option of connecting to a Ghost app and GPS tracking system, which can notify you via phone when your car is altered with or stolen.
The installation of the Ghost immobiliser can be done by a certified technician. It is crucial to have the right equipment and heat shrink tubing.
Getting Started
In contrast to physical security devices like wheel locks or car alarms, ghost immobilisers protect your vehicle without the use of LED indications or key fobs. Instead they connect directly to the ECU's CAN data network. They will only start after entering a PIN code sequence. This gives a more secure level of protection against key hacking, cloning and even ECU swapping.
As a result, installing a ghost immobiliser Birmingham must be completed with a high degree of speed and accuracy. It's like tiptoeing through a minefield; one misstep could cause irreparable damage to the circuits of the electrical system of your vehicle. It is essential to comprehend the installation procedure and prepare your vehicle correctly.
It is necessary to remove interior panels from the vehicle to make space for the immobiliser. Once you've found the ideal location to hide it and secure it with cable ties to keep it from being taken away or tampered with. Next, tidy up the wiring by tying down loose wires, and then using insulation tape or heat shrink tubing to cover the exposed connections. This will reduce the chance of accidental short circuits, while improving the aesthetics and decreasing the chance of tampering from thieves.
Find the source of constant 12V power and an earthing point for the ghost immobiliser. Once you have located them test the power cables using a multimeter. Connect the CAN H and the CAN L wires from the immobiliser with the grounding and power sources.
After you've made all the connections required, it's important to double-check them and inspect the immobiliser for indications of corrosion or damage. You should also test the system to ensure it's working correctly by entering a PIN code and then starting the engine. This should be an integral part of your routine, as it will help to detect any issues that might be intermittent early. Regular testing also helps to extend the life of the device, and keep it operating at peak performance.
Preparing your vehicle
Installing a Ghost immobiliser requires skills and knowledge. A wiring diagram of the vehicle is essential to identify the proper wires and making precise connections, while a multimeter can help verify electrical values and ensure security. Cable tie and insulation tape can be used to secure the connections and shield them from being tampered with. Additionally, a user's manual will give you specific instructions specific to your Ghost Immobiliser model.
Once installed, the ghost immobiliser will stop engine starts that are not authorized by requiring the owner to enter a unique code using the buttons on the console or steering wheel. The code can be changed at anytime by the vehicle owner either by hand or remotely using an app on mobile. The device is silent and undetectable by thieves, since it doesn't emit any radio frequencies.
A ghost immobilise r is connected directly to the vehicle's CAN bus, which is a network that connects to all of the electronic control units (ECUs). It intercepts signals sent by ECUs and shuts down the engine if a false signal is identified. The system is weatherproof and tamper proof. It doesn't have any LED indicators or keys to draw the attention of thieves.
It can be mounted behind the dashboard or in an inconspicuous location, so that it isn't seen by thieves and doesn't interfere with the vehicle's performance. It is also possible to put it in a small container, making it less likely to be discovered during the test drive by unscrupulous car salespeople.
Its discrete operation and integration with the vehicle's CAN bus network make it a formidable deterrent to modern methods of theft, such as key cloning and signal relay attacks. Combining the system with other security measures will create a formidable barrier that will deter even the most persistent thieves. A growing number of insurance companies suggest or require ghost immobilisers, as they can cut down on the cost of insurance.
Making Connections
Ghost immobilisers are silent unlike traditional security systems that can be heard by thieves. They stop thieves from knowing that your vehicle is running. They also stop high tech methods of theft, such as OBD hacking. They can also be installed without leaving permanent marks on your vehicle which makes them a great option for those planning to sell their vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the newest and most reliable solutions for preventing car theft. It blocks your engine through the CAN data network and generates a unique PIN number which is difficult to steal from criminals. It can be used on various automobiles, and it can work with all the features that are already in place, such as car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you decide to opt for a Ghost immobiliser, be sure to refer to the wiring diagram of your specific vehicle model to determine the wires that need connecting. Double-check the locations of these wires to ensure that they are in the correct location and mark them with tape or labels to help you keep the track of them. It is also necessary to find a source of constant power (12V) and a grounding point for the system. Once you have all the components, you can begin making the connections to complete the installation.
If the ghost immobiliser has been connected to the CAN bus, it will prevent your vehicle from starting until you enter a pin code through the buttons on the dashboard or the steering wheel. This will stop ECU hacking keys cloning, hacking, and other methods of theft. It can also be paired with other Thatcham approved security devices such as alarms or tyre clips to give your car an even greater level of protection.
As the UK automotive industry continues to grow as do the options available for securing your car. There are a myriad of ways that thieves can get into your car and steal it, so it's important to take every precaution to ensure that it isn't taken. Ghost immobilisers have become an increasingly popular option for car owners who are responsible.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU using the CAN network. This prevents the engine from starting until the PIN code has been entered. This makes it very difficult for thieves copy the key fob that you use to start your vehicle, and harder to disable the system by hacking its electronic.
Ghost Immobilisers can also be used with GPS tracking devices to assist you to locate your vehicle if it is stolen. This is a feature that isn't often available in aftermarket security products however it is an excellent option to boost your vehicle's security and provide you with peace of peace of.
The Ghost-II immobiliser offers not only greater security, but also a convenient experience for the user by eliminating the need to use additional key fobs or devices. It has a simple, user-friendly PIN code entry that can be integrated seamlessly into your daily routine. It also has convenience features and deactivation modes that let you temporarily disable the immobiliser in order to park or service your vehicle.
Before you begin the installation process, you should be familiar with your vehicle's wiring and prepare the necessary tools. A basic set of hand tools will provide you with the ability to make precise connections, while a multimeter will help determine electrical values. Insulation tape and heat shrink tubing are also essential for protecting connections from short circuits while cable ties can be used to secure the wiring in the correct position. Additionally, it is essential to work in a well-lit location and wear the appropriate safety equipment when working with tools and electrical components.
You should test the Ghost immobiliser after having completed the installation to ensure it's working correctly. Try to start the vehicle without entering the PIN. If this fails, you'll need to test the system again and conduct a more thorough inspection of the connections.
Unlike other security systems unlike other security systems, unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is more effective than conventional physical deterrents like wheel clamps or steering locks. It is TASSA approved and recognised by some insurance companies, which makes it an investment that is cost-effective and will provide you with peace of mind you need.